自1935年以來，F(xiàn)ENWAL CONTROLS 設計和制造行業機構認可的關鍵控制產品。FENWAL為暖通空調、商業烹飪、醫療、房車、工業設備、消防和許多其他市場的原始設備制造商提供服務。通過廣泛的分銷商網絡在全球范圍內提供產品和技術支持。

KIDDE-FENWAL火焰探測器27121-0-210產品介紹

說明

DETECT-A-FIRE®（D-A-F）探測器是許多消防系統的“核心”部件。高度可靠的 D-A-F 已作為行業標準使用了 75 年以上。D-A-F 用于指示過熱或起火狀態。在絕大多數應用中，D-A-F 提供初始的熱感測，用來啟動潔凈氣體、CO?、惰性氣體、干/濕化學藥劑或水等滅火系統。  

D-A-F 探測器因采用“速率補償”設計而被廣泛認可。與傳統定溫型和差定溫（升溫速率）型探測器相比，D-A-F 的獨特優勢在于：無論火勢增長速度如何，它都能準確感知周圍空氣溫度，并在預設整定點啟動系統。  

定溫探測器必須整體被加熱到報警溫度，在火勢快速發展時可能出現響應滯后。差定溫裝置則是由環境溫度上升速率觸發，容易受到來自工藝烘爐等無害瞬時熱氣流的影響而產生誤報。  

D-A-F 探測器靈敏度的關鍵在于其結構設計（見圖 1）。外殼采用快速膨脹合金制成，可快速跟隨周圍空氣溫度變化。內部支柱采用膨脹速度較慢的合金制成，被設計為抵抗熱能吸收，并密封在外殼內部，因而對溫度變化的響應較慢。  

在慢速升溫火災中（圖 2），外殼和支柱會一起被加熱，到達整定溫度時，探測器動作，觸發報警或釋放滅火劑。  

瞬時熱空氣流（升溫速率可達 40°F/分鐘）可能會使外殼膨脹，但不會觸發探測器。通過忽略短暫的熱空氣擾動，D-A-F 探測器幾乎消除了差定溫裝置常見的誤報警。  

如果發生快速升溫火災（圖 3），外殼會迅速膨脹，內部支柱將閉合，觸發報警和/或釋放滅火劑?；饎?shì)增長越快，D-A-F 探測器響應越早。  

特性

• 可重復使用——自復位，無需更換，可測試

• 通用性強——可提供多種溫度整定點

• 結構堅固——不銹鋼外殼，壽命長

• 經濟——允許較大安裝間距，降低安裝成本

• 出廠預設整定溫度

• 內部觸點區域在不銹鋼外殼內實現氣密封裝

• 符合 RoHS 要求  

應用

• 學校、工廠、辦公樓、圖書館及其他非住宅建筑的防護

• 發電設施

• 加油站島位區域

• 噴漆房

• 廚房排煙罩/灶臺罩

• 發動機艙/發動機艙室

DESCRIPTION

DETECT-A-FIRE® (D-A-F) detectors are the "heart" of many fire protection systems. The highly reliable D-A-F has been the standard for over 75 years. The D-A-F is used for signaling overheat or fire conditions. In the vast majority of applications, the D-A-F provides the initial heat sensing that is used to activate suppression systems using clean agent, CO2, inert gases, wet or dry chemicals or water.

D-A-F detectors are widely accepted, because they are designed with rate compensation. This provides a unique advantage over both fixed temperature and rate-of-rise types of detectors because the D-A-F detector accurately senses the surrounding air temperature regardless of the fire growth rate. At the pre-determined set point, the system is activated.

Fixed temperature detectors must be completely heated to alarm temperature and therefore a lag in response time may occur with a fast rate fire. Rate-of-rise devices, on the other hand, are triggered by the rate of increase in ambient temperature and are subject to false alarms caused by harmless, transient thermal gradients such as the rush of warm air from process ovens.

The key to the detector's sensitivity is in the design (Figure 1). The outer shell is made of a rapidly expanding alloy which closely follows changes in surrounding air temperature. The inner struts are made of a slower expanding alloy. Designed to resist thermal energy absorption and sealed inside the shell, the struts follow temperature changes more slowly.

A slow rate fire (Figure 2) will heat the shell and struts together. At the "set point", the detector will trigger, actuating the alarm or releasing the extinguishant.

A transient rush of warm air up to 40°F/min. may expand the shell, while not triggering the detector. By ignoring transient warm air excursions, the D-A-F detector virtually eliminates false alarms prevalent with rate-of-rise devices.

If a fast rate fire (Figure 3) starts, the shell will expand rapidly. The struts will close, actuating the alarm and/or releasing the agent. The faster the fire rate of growth, the sooner the D-A-F detector will react.

FEATURES

• Repeatable - self-restoring, nothing to replace, testable

• Versatile - various temperature settings available

• Durable - long lasting stainless steel shell

• Economical - wide spacings reduce installation costs

• Factory set

• Internal contact area hermetically sealed in stainless steel shell

• ROHS Compliant

APPLICATIONS

• Protection of schools, factories, offices, libraries,

or other non-residential buildings

• Power generation

• Gas station islands

• Paint spray booths

• Range hoods

• Engine compartments

KIDDE-FENWAL火焰探測器其他常用型號：

KIDDE-FENWAL 27121-0-140

KIDDE-FENWAL 27121-0-160

KIDDE-FENWAL 27121-0-190

KIDDE-FENWAL 27121-0-210

KIDDE-FENWAL 27121-0-210

KIDDE-FENWAL 27121-0-275

KIDDE-FENWAL 27121-0-325

KIDDE-FENWAL 27121-0-360

KIDDE-FENWAL 27121-0-450

KIDDE-FENWAL 27121-0-500

KIDDE-FENWAL 27121-0-600

KIDDE-FENWAL 27121-0-725

KIDDE-FENWAL FIRE / OVERHEAT DETECTOR NEW + ORIGINAL+ ONE YEAR WARRANTY

愛澤工業成立于2010年，定位于向制造工業提供制造技術和設備。代理經營世界優質的電氣自動化、機械與傳動、流體控制、儀器儀表、工具等產品。作為電氣，液壓以及氣動解決方案的合作伙伴，我們利用我們的全球協作團隊，為客戶提供先進解決方案，市場知識以及相關增值服務來幫助優化客戶的工作效率，提高可靠性和安全性，致力于成為工業產品和解決方案的優質渠道。

如果有任何關于KIDDE-FENWAL火焰探測器27121-0-210的疑問，請隨時與我們溝通。我們將盡全力解決您的問題。

If you have any question for KIDDE-FENWAL products, Please feel free to communicate with us and we will do our best to solve your problem.

KIDDE-FENWAL火焰探測器27121-0-210技術參數及介紹