OMAL是由一群從事球閥制造和生產的企業家家族于1981年成立的公司。產品有：化學和制藥，工業，電力和能源以及航海業等
OMAL角閥J9SPG2309技術參數
J：系列
9：青銅
S：常閉（入口1或2）
P：執行器殼體材料 PA66（尼龍66）
23：公稱直徑 DN 110
0：接口標準 ISO 228/1 和 7/1 Rp（GAS）
9：2英寸
J：series
9：Bronze
S：normally closed (inlet 1 or 2)
P：PA66 Material of actuator body
23： DN 110
0：ISO 228/1 e 7/1 Rp (GAS)
9：2”
OMAL角閥介紹
特性
2/2 OMAL 角閥為氣動驅動，極為可靠。它們保證高循環壽命并實現氣密封閉。閥體裝配自潤滑、自調節的閥塞-閥桿組件，隨磨損自動校正。并配有刮片以防異物進入滑動部位。自定位閥塞配合 PTFE 密封，在苛刻工況下亦能確保緊密關閉。ARES 和 ATENA 型閥提供不銹鋼（AISI 316）材質，能與大多數介質高兼容。ZEUS 產品采用青銅閥體、內部件為 AISI 316，適用于與青銅 RG6（Ni > 2%）兼容的應用，兼顧可靠性與較低購置成本。所有版本均配有工程樹脂材質的執行器。
應用
按下列建議安裝角閥可獲得最佳效果與長期性能：
控制介質
干態或潤滑的壓縮空氣、其他氣體或惰性介質
溫度：配標準 PA66 控制頭時 -10 °C（+14 °F）至 +60 °C（+140 °F）；可選 PPS 控制頭時 +5 °C（+41 °F）至 +130 °C（+266 °F）
壓力：視型號而定，一般在 0.8 bar（11 psi）至 10 bar（145 psi）之間
被截?cái)嘟橘|(zhì)
空氣、水、油、汽油、鹽溶液、蒸汽等（任何與 AISI 316、PTFE 或青銅 RGB 相容的物質）
壓力：視所選型號而定，0 至 16 bar（232 psi）；蒸汽時 0 至 10 bar（145 psi）
溫度：-10 °C（+14 °F）至 +180 °C（+356 °F）
最大粘度：取決型號，最高可達 600 cSt（mm2/s）
介質流向：見附表。
Features
The 2/2 OMAL angle valves are pneumatically operated and extremely reliable.They guarantee a high number of working
cycles as well as bubble tight sealing. They are installed with a self-lubricating and self-adjusting plug-stem set that
automatically adjusts itself as it wears. They are also supplied with a scraper to avoid the introduction of foreign bodies in
the sliding area. The self-aligning plug, with a seal in PTFE, guarantees tight closure even in the most arduous conditions.
The ARES and ATENA. valves which are supplied in stainless steel (AISI 316) guarantees high compatibility with most
media. The ZEUS product having a bronze body and internal parts in AISI 316 ensure reliability and low acquisition cost
running for all those applications that are compatible with bronze RG6 (Ni > 2%). All versions are equipped with an actuator
made in engineering resin.
Application
The best results and a long lasting performance are achieved by installing the angle valve according to the following
application guidelines :
controlling media
- dry or lubricated compressed air, other gas or neutral media
- temperature between -10 °C (+14 °F) and +60 °C (140 °F) for the model with a standard control head in PA66 ; temperature
between +5 °C (+123 °F) and +130 °C (+266 °F) for the model with the control head in PPS (on request).
- pressure between 0.8 bar (11 psi) and 10 bar (145 psi), depending on the model.
Intercepted media
- air, water, oil, petrol, saline solution, steam, etc. (any substance compatible with AISI 316, PTFE or Bronze RGB)
- pressure between 0 and 16 bar (232 psi) (steam pressure between 0 and 10 bar (145 psi)) depending on the chosen
model
- temperature between -10 °C (+14 °F) and +180 °C (+356 °F)
- Maximum viscosity : 600 cst (mm2/s) depending on the model
- media direction : see table attached.
OMAL角閥其他常用型號：
OMAL J9SPG1403
OMAL J9SPG1404
OMAL J9SPG1405
OMAL J9SPG1603
OMAL J9SPG1604
OMAL J9SPG1605
OMAL J9SPG1805
OMAL J9SPG1806
OMAL J9SPG2106
OMAL J9SPG2107
OMAL J9SPG2108
OMAL J9SPG2308
OMAL J9SPG2309
OMAL Angle valve NEW + ORIGINAL+ ONE YEAR WARRANTY
愛澤工業成立于2010年，定位于向先進制造工業提供制造技術和設備。代理經營世界的電氣自動化、機械與傳動、流體控制、儀器儀表、工具等產品。作為電氣，液壓以及氣動解決方案的合作伙伴，我們利用我們的全球協作團隊，為客戶提供先進解決方案，市場知識以及相關增值服務來幫助優化客戶的工作效率，提高可靠性和安全性，致力于成為工業產品和解決方案的優質渠道。
如果有任何關于OMAL角閥J9SPG2309的疑問，請隨時與我們電聯，我們將盡全力解決您的問題。
If you have any question for OMAL products, Please feel free to communicate with us and we will do our best to solve your problem.
OMAL角閥J9SPG2309參數介紹
