IEPE是指一種自帶電量放大器或電壓放大器的加速度傳感器。IEPE是壓電集成電路的縮寫。因為由加速度傳感器產(chǎn)生的電量是很小的，因此傳感器產(chǎn)生的電信號很容易受到噪聲干擾，需要用靈敏的電子器件對其進行放大和信號調(diào)理。IEPE中集成了靈敏的電子器件使其盡量靠近傳感器以保證更好的抗噪聲性并更容易封裝。
美國Dytran的3027B是一款IEPE加速度傳感器/振動傳感器，靈敏度>10 mV/g，自帶電量放大器，通過10-32螺紋孔可安裝振動頭。
The Dytran 3027B is a double ended IEPE reference (comparison) accelerometer, offering a convenient means of determining the sensitivity and frequency response characteristics of unknown acceleration, velocity and displacement sensors. A vibration laboratory already equipped with an electrodynamic shaker and control system can easily incorporate use of the model 3027B to accomplish in-house NIST traceable calibrations. Model 3027B offers a >10 mV/g sensitivity, and mounts to a shaker head via a 10-32 tapped hole.
Back-to-back comparisons with a double ended calibration standard accelerometer, such as the Dytran model 3027B, entails mounting the test accelerometer directly to the top mounting surface of the calibration standard (model 3027B) and driving the coupled pair with an electrodynamic shaker system at various frequencies and amplitudes. At each test frequency, the amplitude is set and the corresponding output read from the test accelerometer. To form a complete measurement system, the user will need to supply the cables, power supply unit and electrodynamic shaker system. The model 3027B should be used for low frequency, low g level measurements.
特性
1. >10 mV/g sensitivity
2. 500g range
3. .5 to 10,000 Hz frequency range (±5%)
4. 10-32 coaxial connector
5. 1/4 tapped holes, top and bottom
6. 100 grams
7. Stainless steel
8. Back to back standard accelerometer
9. IEPE
應用
1. Back-to-back accelerometer calibration
連續(xù)加速度校準
2. Low frequency, low g level measurements
低頻，低g值水平測量
3. NIST traceable calibrations (when used with appropriate electrodynamic shaker, power supply and control system)
可追蹤式校準
SENSITIVITY [1] >10 mV/G
DISCHARGE TIME CONSTANT 1.0 Sec
FREQUENCY RESPONSE ±5% [2] 0.5 TO 10k Hz
RESONANT FREQUENCY, NOM 40 kHz
RANGE FOR ±5 VOLTS OUT, NOM. ±500 G
OPERATING FORCE RANGE [3] ±40 Force-Lbs.
EQUIVALENT ELECTRICAL NOISE FLOOR .01 G, RMS
OUTPUT IMPEDANCE <100 Ohms
COEFFICIENT OF THERMAL SENSITIVITY .03 %/°F
TEMPERATURE RANGE -60 to +200 °F
TRANSVERSE SENSITIVITY, MAX 3 %
CONNECTOR, RADIAL 10-32 COAXIAL Jack
MOUNTING HOLES, TOP/BOTTOM 1/4-28/10-32 UNF-2B
MATERIAL (NON-MAGNETIC) 300 SERIES STAINLESS STEEL
SUPPLY CURRENT (CONSTANT CURRENT) 2 to 5 mA
COMPLIANCE VOLTAGE +20 VDC
WEIGHT 3.5/100 oz/grams
訂貨型號
3027B
3027B1T TEDS
配件
Supplied Accessories: (1) model 6200 mounting stud (10-32 to 10-32), (1) model 6201 mounting stud (10-32 to 1/4-28)
Recommended Accessories: model 4010C current source power unit, model 6213 adhesive mounting base
Compatible Cables: 6010A, 6011A, 6012A, 6016A, 6018A, 6022A, 6026A, 6032A, 6033A, 6049A, 6050A, 6051A, 6053A, 6054A, 6066A, 6069A, 6093A, 6099A, 6400A, 6401A, 6412A, 6429A, 6924A, 6930A, 6991A
相關型號
3120B
3123A
