LFA-C31系列開環型可拆卸霍爾電流傳感器的初、次級之間是絕緣的，用于控制、測量直流、交流和脈沖電流。
LFA-C31 series dismountable hall effect current sensor is a open loop device based on the measuring principle of the hall effect ,with a galvanic isolation between primary and secondary circuit,it provides accurate electronic measurement of DC,AC or pulsed currents.
| 使用說明 Directions for use |
1. 當待測電流從傳感器穿過，即可在輸出端測得電壓大小。(注意：錯誤的接線可能導致傳感器損壞)
When the current will be measured goes through a sensor,the voltage will be measured at the output end.
(Note:The false wiring may result in the damage of the sensor)
2. 可按用戶需求定制不同額定輸入電流和輸出電壓的傳感器。
Custom design in the different rated input current and the output voltage are available.
| |
l UL94-V0.
l EN60947-1:2004
l IEC60950-1:2001
l EN50178:1998
SJ 20790-2000
| 電參數 Electrical data(Ta=25℃±5℃,RL=2KΩ,CL=10000PF) |
| 型號 Type 參數 Parameter | LFA30C31 | LFA50C31 | LFA100C31 | LFA200C31 | LFA300C31 | LFA400C31 | LFA500C31 | 單位 Unit |
| 額定輸入電流(Ipn) Rated current(Ipn) | ±30 | ±50 | ±100 | ±200 | ±300 | ±400 | ±500 | A |
| 測量電流范圍(Ip) Measuring range(Ip) | ±60 | ±100 | ±200 | ±400 | ±600 | ±800 | ±1000 | A |
| 額定輸出電壓 Rated output | @Ip=±Ipn ±2±1% | V | ||||||
| 電源電壓 Supply voltage | +5±5% | V | ||||||
| 功耗電流 Power Consumption | ≤25 | mA | ||||||
| 零點電壓 Zero voltage | @Ip=0 +2.5±0.5% | V | ||||||
| 失調電壓 Offset voltage | @Ip=0 ±20 | mV | ||||||
| 磁失調電壓 Magnetic offset | @Ip=±Ipn-0 ±20 | mV | ||||||
| 失調電壓溫漂 Offset drift | @ -40～+85℃≤±1 | mV/℃ | ||||||
| 輸出電壓溫漂 | @ -40～+85℃≤±1 | mV/℃ | ||||||
| 線性度 Linearity | @Ip=0-±Ipn ≤1 | %FS | ||||||
| 響應時間 Response time | @50A/μS, 10%-90% ≤5 | μS | ||||||
| 絕緣電壓 Galvanic isolation | @ 50HZ,AC,1min 2.5 | KV | ||||||
| 絕緣阻抗 Isolation resistance | @ DC 500V 1000 | MΩ | ||||||
| 總體參數 General date |
|
| 數值 Value | 單位 Unit | 符號 Symbol |
| 工作溫度 Operating temperature | -40 to +85 | oC | TA |
| 儲存溫度 Storage temperature | -40 to +125 | oC | TS |
| 毛重(約)Mass(approx) | 72 | g | M |
| 特性圖Characteristics chart |
脈沖電流信號響應特性 抗脈沖電壓干擾特性
Pulse current signal response characteristicEffects of impulse noise
| 結構參數 Mechanical dimension(for reference only) |
Remarks：
1. All dimensions are in mm.
2. General tolerance ±1mm.
| 應用 Applications |
l 變頻調速系統
Variable speed drives
l 電焊機
Welding machine
l 通訊電源
Battery supplied applications
l 不間斷電源UPS
Uninterruptible Power Supplies (UPS)
l 電化學
Electrochemical
