- 商品名稱: JH21 單點氣動沖床
JH21 Series High performance open back stationary pneumatic press
Main Features:
1, This series of press frame is welded by steel plates, small deformation, good rigidity.
2, This series of machines adopts pneumatic friction clutch-brake combination, long service life, low noise, stable transmission. The six surfaces of the guide rail, precision is high, can prolong the life of die, die height adjustment is convenient and reliable, with emergency stop, inching, single and continuous operation specification.
3, Optional: PLC electrical control system, air cushion, photoelectric safety protection device.
標準配置
1可編程控制器（PLC）法國施耐德、日本和斯普林
施耐德2個主要電氣部件
3日本昭和液壓過載保護裝置
4自動潤滑裝置中國臺灣流過
5日本豐興雙電磁閥
6干式離合器國產定界
7電機國產新達
8電動調模裝置
9數顯高度指示器
10滑塊及模具平衡裝置
11工作臺
12行程角指示器
13吹氣裝置
14旋轉凸輪控制器
15個減震器
16合格證書
17操作說明1份
18裝箱單1份
可選配置
1腳踏開關1套
2光電保護裝置1套
3臺無級調速裝置（變頻器或調速電機）1臺
4濕式離合器裝置1套
5氣動模墊裝置1套
6快速換模裝置1套
7預設計數器1套
8移動電控箱1套
9活動雙手控制臺1套
10電子凸輪控制系統1套
11模具照明裝置1套
12個進料器1套
13調平機1臺
14機架1套
15機器人1套
| 參數 | Unit | JH21-25 | JH21-45 | JH21-60 | JH21-80 | JH21-125 | JH21-160 | JH21-200 | JH21-250 | JH21-315 | JH21-400 | |
| 公稱力 | kN | 250 | 450 | 600 | 800 | 1250 | 1600 | 2000 | 2500 | 3150 | 4000 | |
| 公稱力行程 | mm | 3 | 4 | 4 | 5 | 6 | 6 | 6 | 6 | 7 | 8 | |
| 行程 | mm | 80 | 120 | 140 | 160 | 180 | 200 | 250 | 250 | 250 | 270 | |
| 行程次數 | 固定 | times/min | 100 | 80 | 70 | 60 | 50 | 45 | 45 | 30 | 30 | 30 |
| 可變 | times/min | 60-100 | 50-80 | 45-70 | 40-60 | 35-50 | 30-45 | 25-45 | 20-30 | 20-30 | 20-30 | |
| 開口高度 | mm | 250 | 270 | 300 | 320 | 350 | 400 | 450 | 500 | 500 | 550 | |
| 開口高度可調范圍 | mm | 50 | 60 | 70 | 80 | 90 | 100 | 110 | 120 | 120 | 120 | |
| 喉口深度 | mm | 210 | 225 | 270 | 310 | 350 | 400 | 430 | 450 | 450 | 490 | |
| 立柱間距 | mm | 450 | 515 | 560 | 610 | 670 | 736 | 910 | 980 | 980 | 1050 | |
| 滑塊底部尺寸 | 左-右 | mm | 360 | 410 | 480 | 540 | 620 | 700 | 880 | 950 | 950 | 1020 |
| 前-后 | mm | 250 | 340 | 400 | 460 | 520 | 580 | 650 | 700 | 700 | 750 | |
| 模柄孔尺寸 | 直徑 | mm | 40 | 50 | 50 | 50 | 70 | 70 | 70 | 70 | 70 | 70 |
| 深度 | mm | 65 | 60 | 70 | 65 | 90 | 100 | 100 | 130 | 130 | 130 | |
| 臺面尺寸 | 左-右 | mm | 720 | 825 | 930 | 950 | 1100 | 1170 | 1390 | 1500 | 1540 | 1700 |
| 前-后 | mm | 400 | 440 | 520 | 600 | 680 | 760 | 840 | 880 | 880 | 950 | |
| 落料孔尺寸 | mm | 150 | 150 | 150 | 180 | 200 | 180 | 200 | 200 | 200 | 200 | |
| 臺面厚度 | mm | 80 | 110 | 130 | 140 | 155 | 165 | 180 | 190 | 190 | 210 | |
