螺帶混合機一般用于粘性或有凝聚性的粉粒體的混合以及粉粒體中添加液體及糊狀物料的混合，同時由于粘性物料清洗困難的特點，適用于產量大、不經常更換品種的場合混合。臥式螺帶混合機廣泛適用于化工、醫藥、復合肥、染料、顏料、橡膠、建材、食品、奶粉、保健品、飼料、添加劑、養殖業、生物工程、精細化工、陶瓷、耐火材料、稀土、塑料玻璃以及新材料、核能材料等行業的固－固（即粉體與粉體）、固－漿（即粉體與漿體）的物料混合。

The ribbon mixer is generally used to mix sticky or agglomerate powder material or powder material with liquid and slurry material. Considering the difficulty in cleaning the sticky material, the equipment is also suitable for big production capacity and the occasion wher the material doesn’t often change. The mixer is widely used in the following sections: chemical, pharmacy, compound fertilizer, dyestuff, pigment, rubber, construction material, foodstuff, milk powder, health products, feedstuff, additives, livestock breeding, biological engineering, fine chemical, ceramics and so on. It is mainly aim to mixer powder and powder material or powder and liquid material.

II. 特點 Features

1.混合速度快，能滿足原料存在各種物理性質在混合時的苛刻要求；fast mixing 2.正反螺帶主軸在水平位置，形成高效的攪拌機環境；efficient mixing

3.運轉平穩、性能穩定、維護簡便；stable and easy maintenance

4.在具備一定比例的內外螺帶在接近于臨界轉速下混合；mixing at critical speed

5.臥式機身便于安裝，適應多數廠房結構。Easy installation

III．工作原理 Working principle

該機型由容器、螺旋攪拌葉片和傳動部件組成：螺旋葉片一般做成雙層或

三層，外層螺旋將物料從兩側向*匯集，內層螺旋將物料從*兩側輸送，形成對流混合。

The mixer consists of container, helix mixing blade and transmission parts. The helix blade is usually designed into double layer or three layers. The outer ribbon will make the material from both sides gather in the center while the inner ribbon will make the material from the center feed in the sides. This can form counter current mixing.

主要設備構成（成套型）

1. 填料系數:0.4-0.6

2.氣動閥門出料裝置

3. 操作條件:常溫常壓粉塵密封

4.混合時間（min）:8-10分鐘

5.密封形式: 四氟乙稀及機械密封

6.物料粒度：20-1200目

使用 operation

1．開箱后，檢查合格證.使用說明書.裝箱單.資料是否齊全,備品備件是否齊全。

After opening the wooden box, please check whether the qualified certificate, user’s manual, packing list and spare parts are complete.

2.檢查在運輸過程中，機器有無損壞，各緊固件是否松動。

Please check whether the mixer is in good condition after long transportation. The fasten parts is loose or not.

3.機體內部已進行處理，如經過*擱置或長途運輸，開車前必須打開前蓋，檢查機內是否有雜物，如有雜物必須仔細清理，以免鐵銷混入產品。

The inner parts of the mixer have been treated. If it is left for a long time or long transportation, please check whether the inner parts of the mixer have sundries before starting the mixer. If there are some sundries, please clean them.

4.檢查減速機的機油是否加到油標位置。